Page 1 of 1
2" Gold Neck Mount Screws
Posted: Sun Mar 31, 2019 3:00 pm
by Guy Marshall
Hi everyone, new MIMF member here! So... I build a home made guitar and 'm have a very hard time finding 2" Gold Neck Mount Screws! Did the Google search and nothin'! All the usual guitar parts biggies do not carry them. Am I the only guy with a thicker than normal guitar body having this problem locating these screws? Do they even exist? Any help given will greatly be appreciated. Best wishes,
Guy Marshall
Re: 2" Gold Neck Mount Screws
Posted: Mon Apr 01, 2019 10:44 am
by Bryan Bear
Is this what you are looking for but in gold?
https://www.woodcraft.com/products/high ... 3d6e0001e2
Also, I'm pretty sure these are available in a brass coated finish at places like Home Depot. If you can't find 2 inch, you can get them longer and cut the ends off.
Re: 2" Gold Neck Mount Screws
Posted: Mon Apr 01, 2019 8:48 pm
by Steve Sawyer
Spax screws come in a gold-colored plating. Not exactly what we see on guitar hardware but might be close enough, and they come in lengths up to 2" in quarter-inch increments.
Re: 2" Gold Neck Mount Screws
Posted: Tue Apr 02, 2019 5:33 pm
by Guy Marshall
Thanks guys, I'll look into it!
Re: 2" Gold Neck Mount Screws
Posted: Tue Apr 02, 2019 5:34 pm
by Guy Marshall
Thank you!
Re: 2" Gold Neck Mount Screws
Posted: Tue Apr 02, 2019 6:39 pm
by Barry Daniels
Re: 2" Gold Neck Mount Screws
Posted: Tue Apr 02, 2019 9:16 pm
by Bryan Bear
Wait are we talking about a bolt on electric neck or bolt on acoustic?