My latest violin repair.
Posted: Sat Sep 06, 2014 10:13 am
I have an old Nippon fiddle that needs a lot of work. It had taken a good whack at some point in it's life and was repaired by a monkey. The back had a couple of areas that needed re gluing but it was so poorly aligned that I had to remove the entire thing to get it right. The top had a section of the upper bout that was broken and glued way out of alignment with gobs of glue still on the top.
Along comes monkey number 2. Me. I tried to scrape the glue off and ended up damaging the finish a little. So now I've got the back off and after doing a trial clamping I will be able to get the back on in proper alignment with no trouble. I took the broken piece on the top off and reattached it and it's 100 times better now but still not perfectly flush but very close. I'm not sure if I should take it apart and try again or try to flatten it. I need to fix the finish anyway. My repair
Along comes monkey number 2. Me. I tried to scrape the glue off and ended up damaging the finish a little. So now I've got the back off and after doing a trial clamping I will be able to get the back on in proper alignment with no trouble. I took the broken piece on the top off and reattached it and it's 100 times better now but still not perfectly flush but very close. I'm not sure if I should take it apart and try again or try to flatten it. I need to fix the finish anyway. My repair