Weissenborn Build Progress

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.
Post Reply
Kerry Werry
Posts: 63
Joined: Tue Apr 10, 2012 3:21 pm

Weissenborn Build Progress

Post by Kerry Werry »

Since I got some of the advice on this build from this form I thought it would be good to post some progress reports here.

My main challenges with this build are making and installing rope bindings and the changes to my build order of things i had to make because the neck and body are the same part.. Still a fun build and i think i will do more.

Below are some photos of building up the bindings.. I have Byrnes Model Machines table saw and drum sander which were great for this process (and lots of other stuff)
1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
Freeman Keller
Posts: 494
Joined: Mon Feb 27, 2012 11:34 am

Re: Weissenborn Build Progress

Post by Freeman Keller »

Nice work. When I built my Weissies I just bound them in maple and used a commercial rope material for the rosette - I think that is more or less style 2. Good job on making your own

Image

The other funky part of the build was coming up with a jig that would hold the head and sides in alignment

Image
Kerry Werry
Posts: 63
Joined: Tue Apr 10, 2012 3:21 pm

Re: Weissenborn Build Progress

Post by Kerry Werry »

Nice looking build.. I've just glued up some thinner rope binding to try and bend my own rosette so we will see how that goes..

For my form i used a Variant of the adjustable one you see some folks use.. I will post a photo when i update this next.

Kerry
Kerry Werry
Posts: 63
Joined: Tue Apr 10, 2012 3:21 pm

Re: Weissenborn Build Progress

Post by Kerry Werry »

Here is what I am using for a mold..

I prefer this style for flexibility

20171026_181107.jpg
Kerry Werry
Posts: 63
Joined: Tue Apr 10, 2012 3:21 pm

Re: Weissenborn Build Progress

Post by Kerry Werry »

Making progress.. bending the bindings went well.. fretboard next

Kerry
20171112_194832.jpg
20171112_194855.jpg
Freeman Keller
Posts: 494
Joined: Mon Feb 27, 2012 11:34 am

Re: Weissenborn Build Progress

Post by Freeman Keller »

Nice
Bob Francis
Posts: 582
Joined: Wed Jan 11, 2012 6:28 pm

Re: Weissenborn Build Progress

Post by Bob Francis »

Yes indeed!
Kerry Werry
Posts: 63
Joined: Tue Apr 10, 2012 3:21 pm

Re: Weissenborn Build Progress

Post by Kerry Werry »

Now getting on with French Polish.. Fingerboard & Bridge just sitting there....

Inlay on the fingerboard is actually Timbermate..

Kerry
20171206_191429.jpg
Kerry Werry
Posts: 63
Joined: Tue Apr 10, 2012 3:21 pm

Re: Weissenborn Build Progress

Post by Kerry Werry »

And ready for strings... Whew.. was intended as a Christmas present so a bit of pressure to get it done on time..

Kerry
20171213_211353.jpg
20171213_211404.jpg
20171213_211421.jpg
Freeman Keller
Posts: 494
Joined: Mon Feb 27, 2012 11:34 am

Re: Weissenborn Build Progress

Post by Freeman Keller »

Nice looking Weissie, Kelly.

One thought on strings - there was a discussion some time back at OLF about strings for a Weissenborn and of course it depends on tuning but one of the things I remember (and I do on mine) is to run pretty heavy first and second strings. I tune to D, standard open G or (rarely) high bass G and usually mediums will work pretty good if you bump the first couple up. I think I have a 16 on it now. The idea is that that since its tuned down a couple of semitones you need to get the tension back up and with a light gauge string there you risk hitting the top when you angle your steel to play first string leads. If you look at old Weissies a lot of them have the binding beat to heck where the top curves into the fretboard.
Kerry Werry
Posts: 63
Joined: Tue Apr 10, 2012 3:21 pm

Re: Weissenborn Build Progress

Post by Kerry Werry »

Used John Pearse 3120L's

http://www.jpstrings.com/brstring.htm

Kerry
Michael Hampel
Posts: 4
Joined: Sat Jan 16, 2016 11:48 am

Re: Weissenborn Build Progress

Post by Michael Hampel »

Greetings All,
Long time reader, first time posting. I’m starting a couple of Weissenborns, and have gleaned a bit of info from these and other posts, thanks. I’d like to put pickups in them and wondering what you all might recommend or thoughts on the subject.

Beautiful work folks.

Thanks,

Michael
Freeman Keller
Posts: 494
Joined: Mon Feb 27, 2012 11:34 am

Re: Weissenborn Build Progress

Post by Freeman Keller »

Hi Michael. I haven't installed a pickup in mine but the one I see most often is the Sunrise sound hole pup - that seems to be what Ben Harper and David Lindley and folks like that use. I did play one with a standard UST and thought it sounded fne but that would mean that you would be using a standard saddle (again, thats what I did but traditionally the saddle is simply a piece of fretwire). My standard acoustic pickup is a K&K bridgeplate transducers - I don't think you could go wrong with that.

I did buy a Seymour Duncan woodie sound hole pup that I was going to put in it but the hole was too small (it doesn't have the mounding screws and little ears like a normal sound hole pup) - it might make sense to get your pickup and make sure it will fit the hole when you cut it.
Michael Hampel
Posts: 4
Joined: Sat Jan 16, 2016 11:48 am

Re: Weissenborn Build Progress

Post by Michael Hampel »

Thanks Freeman,

I’ll check out the Sunrise. I’ve had good luck with the R&R myself, and either way I’m going to use a bone saddle. I still have a bit of time, just finished up processing all th wood, and getting ready to finally dive in to building.

Thanks again,
Michael
Post Reply

Return to “Flat-Top Acoustic Guitars and Bass Guitars”