Looking for replacement nickel guitar case feet/studs

Ask your wood and other materials questions here. Please DO NOT post pictures and ask us to identify your wood, we have found that accurate ID is nearly impossible, and such discussions will be deleted. Thanks.
Post Reply
Allan Kaplan
Posts: 1
Joined: Mon Aug 14, 2017 9:10 pm

Looking for replacement nickel guitar case feet/studs

Post by Allan Kaplan »

The good folks at Stew-Mac told me that if anyone could help me out, it would be the users at MIMF:

I'm looking for a replacement nickel guitar case feet/studs for a plastic Fender case, as one has been knocked off. These are the domed feet with a split-rivet type of fastening, measuring about 13/16" diameter with the dome about 1/4" tall. I have found some the same diameter, but not this height; all others are much taller.

I've checked with Ohio Travel Bag, eBay, and combed the interwebs, and haven't had luck.

Any suggestions for a source would be greatly appreciated.

Thanks!
User avatar
Bob Gramann
Posts: 1101
Joined: Fri Jan 06, 2012 11:08 am
Location: Fredericksburg, VA
Contact:

Re: Looking for replacement nickel guitar case feet/studs

Post by Bob Gramann »

You might check with Fender. If TKL makes their cases, TKL will have the replacement parts.
Post Reply

Return to “Wood and Materials Q&A”